Ti2SC粉体的快速合成及其反应机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM256

基金项目:

河南省教育厅自然科学项目(14A430032和15A430021;河南工业大学自然科学项目(2013JCYJ06)


Rapid Synthesis and Reaction Mechanism of Ti2SC Powder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以TiS2、Ti、石墨粉(C)为原料,在200~1100 ℃温度范围内,用微波混合加热法合成Ti2SC 陶瓷粉体。探讨了反应温度对Ti2SC制备的影响,并在1000~1400 ℃温度下用无压烧结进行对比研究。采用XRD、SEM、DSC和热力学对样品的物相、形貌和反应机理进行分析。研究结果表明:利用无压烧结到1400 ℃保温15 min,样品中主相是C,只合成了少量目标相Ti2SC。而用微波混合加热, 400 ℃时,样品中主相为Ti2SC,含有大量的C。升温到800 ℃,目标相衍射峰增强,C衍射峰减弱。在 1100 ℃保温3 min,合成了单相Ti2SC 粉体材料,其颗粒平均尺寸为2-5 mm。在TiS2-Ti-C体系中,400 ℃以下,TiS2和Ti反应生成Ti-S化合物;400 ℃及以上,Ti、C和Ti-S化合物反应生成Ti2SC。

    Abstract:

    Highly pure Ti2SC powder was synthesized by microwave hybrid heating a Ti/TiS2/C powder system in the temperature range of 200-1100 ℃. The effect of sintering temperature on the synthesis of Ti2SC was studied. For comparison, pressureless sintering (PLS) was used to synthesize Ti2SC powder from 1000 ℃ to 1400 ℃ for 15 min. By XRD, SEM, DSC and thermodynamics, the phase assembly, microstructure and reaction mechanism of samples were analyzed. The results indicate that the main phase graphite with small amount of Ti2SC was synthesized at 1400 ℃ by pressureless sintering. However, by microwave hybrid heating,at 400 ℃, Ti2SC phase was detected as a major phase and large amount of graphite existed. The peak of Ti2SC phase became strong together with weakening the peak of graphite at 800 ℃. At 1100 ℃, single-phase Ti2SC powder with the average size of 2-5 μm was achieved. In TiS2-Ti-C system, TiS2 reacted with Ti to form Ti-S compounds below 400 ℃, and Ti-S compounds reacted with Ti and graphite to produce Ti2SC at 400 ℃ and above.

    参考文献
    相似文献
    引证文献
引用本文

关春龙,孙纳纳. Ti2SC粉体的快速合成及其反应机理[J].精细化工,2016,33(9):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-04-06
  • 最后修改日期:2016-05-27
  • 录用日期:2016-07-01
  • 在线发布日期: 2016-08-17
  • 出版日期: