微波混合加热法合成Cr2AlC陶瓷粉体
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ147.1

基金项目:

河南省教育厅自然科学项目(14A430032和15A430021;河南工业大学自然科学项目(2013JCYJ06)


Synthesis of High Purity Cr2AlC Powder by Microwave Hybrid Heating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以Cr、Al、Cr3C2粉为原料,在700-1050 ℃范围内,氩气保护下,用微波混合加热法合成Cr2AlC陶瓷粉体。研究了组分、烧结温度对试样制备的影响。采用XRD、SEM、DSC对样品的物相、形貌进行分析。结果表明,原始组分摩尔配比Cr:Al:Cr3C2=1:2:1,可以获得高纯的Cr2AlC陶瓷粉体。当组分中Al过量10at%、20at%、40at%,样品主相为Cr2AlC,另有少量杂质相Cr7C3。 在700-1000 ℃时,目标相快速增加伴随着Cr-Al间金属化合物、未反应的Cr和Cr3C2的减少。在1050 ℃保温3min,可合成单相的Cr2AlC陶瓷粉体,颗粒尺寸约为5-8祄。

    Abstract:

    Highly pure Cr2AlC powder was synthesized by microwave hybrid heating a Cr/Al/Cr3C2 powder system in the temperature range of 700-1050 ℃ in argon atmosphere. The effect of sintering temperature and constituent on the synthesis of Cr2AlC were studied. By XRD, SEM, DSC, the phase assembly, microstructure and reaction mechanism of samples were analyzed. The results indicated that by microwave hybrid heating,when the molar ratio of mixtures powders 1Cr3C2/2.2Al/1Cr, high pure Cr2AlC powders were obtained at 1050 ℃. When the component Al excess 10at%、20at%、40at%, Cr2AlC with small amount of Cr7C3 were obtained. The amount of Cr2AlC phase was gradually increased by the reaction between Cr-Al intermetallic compounds, un-reacted Cr and Cr3C2 in the temperature range of 700-1000 ℃. And it become a pure phase in the sample with disappearance of intermediate phase at 1050 ℃ for 3min,and the particle size of about 5-8祄.

    参考文献
    相似文献
    引证文献
引用本文

关春龙,赵远勇.微波混合加热法合成Cr2AlC陶瓷粉体[J].精细化工,2017,34(7):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-10-20
  • 最后修改日期:2017-03-01
  • 录用日期:2017-03-06
  • 在线发布日期: 2017-06-02
  • 出版日期: