2-甲基-2-硝基-1-叠氮丙烷合成方法研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ463 .26

基金项目:

江苏前瞻性科研项目(72121632202A)资助。


Study on Synthesis of 2-Methyl-2-Nitro-1-Azido-Propane
Author:
Affiliation:

Fund Project:

Supported by Jiangsu Prospective Research Project foundation of Jiangsu Province (72121632202A)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以2-甲基-2-硝基丙醇为初始原料,经两步反应得到2-甲基-2-硝基叠氮丙烷.产物结构经过IR和NMR检测。通过对实验条件的考察,确定了以三乙胺为缚酸剂、三甲胺盐酸盐为催化剂,合成2-甲基-2-硝基丙基甲磺酸酯的最优条件:(n)2-甲基-2-硝基丙醇:(n)MsCl:(n)三乙胺:(n)三甲胺盐酸盐=1:1.2:1:0.05、二氯甲烷为溶剂,在室温下反应大约2.5h,收率为93.3%。接着考察合成2-甲基-2-硝基叠氮丙烷的最佳条件:(n)2-甲基-2-硝基-丙基甲磺酸酯:(n)叠氮化钠:1:1.5,(DMSO:H2O)ml=10:1,在120℃下反应24h,产率可由30%提高到93.7%。经过两步优化,高产率获得目标化合物,更适合工业化生产。

    Abstract:

    2-methyl-2-nitro-1-azidopropane was synthesized from 2-methyl-2-nitropropanol via a two-step procedure. The structure of the targeted product was confirmed by Fourier transform infrared spectroscopy(FTIR),nuclear magnetic resonance(NMR).According to the study of experimental conditions,the optimum conditions for the synthesis of 2-methyl-2-nitropropyl methanesulfonate were that using triethylamine as acid binding agent and trimethylamine hydrochloride as catalyst,the ratio of reactants is(n)2-methyl-2-nitropropanol: (n) MsCl: (n) Et3N: (n) Me3N.HCl= 1: 1.2: 1: 0.05.And then, the optimum conditions for the synthesis of 2-methyl-2-nitroazepine were determined as follows:(n) 2-methyl-2-nitro-propyl methanesulfonate: (n) NaN3=1:1.5,(DMSO: water )volume=10:1 ,and the reaction was carried out at 120℃ for 24 h.The yield can be increased from 30% to 93.7%. After two steps of optimization, we can obtain the target compound that was high yield as well as more suitable for industrial production.

    参考文献
    相似文献
    引证文献
引用本文

卞林芝,杨康,纵朝阳.2-甲基-2-硝基-1-叠氮丙烷合成方法研究[J].精细化工,2018,35(1):0

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-01-05
  • 最后修改日期:2017-05-22
  • 录用日期:2017-06-08
  • 在线发布日期: 2018-01-05
  • 出版日期: