阻燃剂二羟基硅酸双硫代PEPA酯的 合成及应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Application of Flame Retardant Dihydroxy Silicate Disulfide PEPA Ester
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以四氯化硅(STC)与1-硫基磷杂-4-羟甲基-2,6,7-三氧杂双环[2.2.2]辛烷(SPEPA)为原料,合成二羟基硅酸双硫代PEPA酯阻燃剂,即二羟基硅酸双-1-硫基磷杂-2,6,7-三氧杂双环[2.2.2]辛基-4-甲酯(SDSPE)。探讨了溶剂、反应温度、反应时间及物料比等对产率的影响,最优化工艺条件:二氧六环作溶剂,四氯化硅与SPEPA物质的量比为1:2.1,在30℃下反应6h,再与二倍物质的量的水在60℃下反应4h,得二羟基硅酸双硫代PEPA酯,产率为93.9%。通过FTIR、1H-NMR、热重分析及极限氧指数测试等对产物的结构及性能进行了表征。测试结果表明,产物有很好的热稳定性,且应用于191不饱和树脂时,表现出了较好的阻燃效果。

    Abstract:

    A dihydroxysilicate disulfide PEPA ester flame retardant, dihydroxy silicate bis-1-thiophospha -2,6,7- trioxabicyclo [2.2.2] octyl-4-methyl ester(SDSPE), was synthesized by silicon tetrachloride(STC) and 1-thiophospha-4-hydroxymethyl-2,6,7-trioxabicyclo [2.2.2] octane (SPEPA). The effects of solvent, reaction temperature, reaction time and mass ratio on the yield were investigated. The optimal conditions were selected as follows: dioxane as solvent, the first step kept the reaction going at 30℃for 6h when the molar ratio of STC and SPEPA was 1:2.1, and then reacted with two times amount of water at 60癈 for 4h to obtain a dihydroxysilicate disulfide PEPA ester. The yield could reach to 93.9%. The structure and flame retardance of the product were characterized by means of FTIR, 1H -NMR, TG-DTA analysis and LOI technique. Results showed that the product had a good thermal stability and high flame-retardant efficiency when applied to 191 unsaturated polyester.

    参考文献
    相似文献
    引证文献
引用本文

贺婧,杨海军,宁可,吴希雯,王彦林.阻燃剂二羟基硅酸双硫代PEPA酯的 合成及应用[J].精细化工,2017,34(8):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-03-13
  • 最后修改日期:2017-04-22
  • 录用日期:2017-04-27
  • 在线发布日期: 2017-07-03
  • 出版日期: