UiO-66膜的制备及对正异丁烷的分离
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ028.8

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目)


Fabrication of UiO-66 Membranes for the Separation of n-butane/i-butane
Author:
Affiliation:

Fund Project:

The National Natural Science Foundation of China (General Program, Key Program, Major Research Plan)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用擦涂法在Al2O3支撑体上引入ZrO2层,利用晶种二次生长法在ZrO2层上成功制备了UiO-66膜。通过XRD和SEM测试手段对晶种和膜的结构和形貌进行了表征。在温度为298 K,压力为0.08 MPa下,测试气体分子的渗透性能检测了UiO-66膜的完整性。考察压力和温度对i-C4H10和n-C4H10两种气体在UiO-66膜上的渗透速率的影响,研究了UiO-66膜对i-C4H10和n-C4H10两种气体的渗透选择性能。结果表明,采用多次擦涂法引入ZrO2层后,获得了覆盖度高且膜层厚度均匀的UiO-66膜,膜厚度为5 μm。UiO-66膜对i-C4H10和n-C4H10两种气体具有反向渗透性能,在操作压力为0.08 MPa,温度为298 K时,UiO-66膜对i-C4H10/n-C4H10两种气体的理想渗透选择性达3.60。渗透速率分别为4.39?10-7 mol/(m2?s?Pa)和1.22?10-7 mol/(m2?s?Pa)。

    Abstract:

    Continuous UiO-66 membrane was fabricated on alumina support by pre-coating ZrO2 layer and seeding secondary growth. The structure and morphology of membrane were characterized by XRD and SEM. The membrane integrity was examined by testing the permeance of gas under T=298 K and P=0.08 MPa. The effects of operating pressure and operating temperature on the permeation selectivity of UiO-66 membranes were investigated. As a result, pre-coating ZrO2 layer helped to obtain a continuous uniform UiO-66 membrane of about 5 μm in thickness. Reverse permeation properties were found of i-C4H10 and n-C4H10 on UiO-66 membrane. At 25 ?C and 0.08 MPa, the permeation selectivity of the membrane for i-C4H10/n-C4H10 were 3.60, with the corresponding permeance of 4.39?10-7 mol/(m2?s?Pa) and 1.22?10-7 mol/(m2?s?Pa).

    参考文献
    相似文献
    引证文献
引用本文

张亚明,徐荣,张琪,马文中,钟璟. UiO-66膜的制备及对正异丁烷的分离[J].精细化工,2019,36(1):0

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-02-05
  • 最后修改日期:2018-05-07
  • 录用日期:2018-05-28
  • 在线发布日期: 2018-11-08
  • 出版日期: