羧酸离子液体/氧气催化氧化芳甲醇
DOI:
作者:
作者单位:

1.东华理工大学 江西省聚合物微纳制造与器件重点实验室;2.东华理工大学 江西省合成化学重点实验室

作者简介:

通讯作者:

中图分类号:

O652.7

基金项目:

江西省科技计划项目(20202BABL213021);江西省教育厅科技项目(GJJ210718)


Catalytic oxidation of aryl methyl alcohol over carboxylate ionic liquid/O2
Author:
Affiliation:

1.Jiangxi Province Key Laboratory of Polymer Micro/Nano Manufacturing and Devices,East China University of Technology,Nanchang;2.Jiangxi Province Key Laboratory of Synthetic Chemistry,East China University of Technology,Nanchang ,Jiangxi,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在组合体系“1-乙基-3-甲基咪唑乙酸盐([EMIm][OAc])/O2”作用下,以芳甲醇为原料,经氧化反应,合成了系列芳甲醛(酮)类化合物。通过对条件进行优化,得到适宜反应条件为:芳甲醇与1-乙基-3-甲基咪唑乙酸盐物质量比为1 : 1,氧气压力为0.2 MPa,温度为130 ℃,时间为12 h。在此条件下,实现了苯甲醛克级规模制备,得到20种芳甲醛(酮),产率为65%~96%。根据研究结果与相关文献报道,提出了[EMIm][OAc]通过阴离子作用于苯甲醇,经O2氧化,脱水得到苯甲醛的反应机理。

    Abstract:

    Series of aromatic formaldehydes (ketones) were synthesized via the oxidation of aryl methyl alcohols in the presence of the combination of 1-ethyl-3-methylimidazolium acetate ([EMIm][OAc]) and O2. Through screening the reaction conditions, the optimum conditions were obtained as follows: the moles ratio of aryl methyl alcohols and [EMIm][OAc] is 1/1, O2 pressure 0.2 MPa, reaction temperature 130 ℃, and reaction time 12 h. Under the optimal conditions, the gram-scale preparation of benzaldehyde was realized, and 20 aromatic ketones (formaldehydes) products with yields ranging from 65% to 96% were obtained. Moreover, according to related studies and in combination with the results of control experiments, the oxidation reaction mechanism was reasonably proposed: anion [OAc] of [EMIm][OAc] activated benzyl alcohol, O2 oxidation and dehydration to form benzaldehyde.

    参考文献
    相似文献
    引证文献
引用本文

吴丰田,吴玲,谢宗波.羧酸离子液体/氧气催化氧化芳甲醇[J].精细化工,2023,40(3):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-05-13
  • 最后修改日期:2022-09-15
  • 录用日期:2022-09-22
  • 在线发布日期: 2023-01-17
  • 出版日期: 2022-09-30