CuFeO2制备、表征及对亚甲基蓝的吸附性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Characterization of CuFeO2 and Its Adsorption Properties for Methylene Blue
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用化学共沉淀法合成了纳米粒子CuFeO2,运用扫锚电镜/能谱仪(SEM/EDS)、粉末X衍射仪(XRD)、傅里叶变换红外光谱(FT-IR)和比表面积仪(BET)等技术手段对其进行了表征,分析表明:合成的CuFeO2颗粒大小为20 nm, 比表面积为258.3 m2/g。CuFeO2对亚甲基蓝(MB)的吸附是一个准二级动力学过程,在40 min内快速达到吸附平衡,较好符合Langmuir吸附模型,同时CuFeO2具有优异吸附性能,室温下pH=7时最大吸附量达123.0 mg/g,CuFeO2可作为一种有效除去水体中亚甲基蓝污染物的高容量吸附材料。

    Abstract:

    Nano-size CuFeO2 was prepared with chemical coprecipitation method and its nanoparticles were characterized by scanning electron microscopy/ energy disperse spectroscopy (SEM/EDS), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and BET analysis. The results show that the size of CuFeO2 synthesized is about 20 nm and its specific area is 258.3 m2/g. The adsorption of methylene blue (MB) is a pseudo second-rate kinetic process and reaches equilibrium in 40 min,in good agreement with the Langmuir adsorption model. CuFeO2 has good adsorption ability and its maximum adsorption capacity reaches 123.0 mg/g at room temperature and pH = 7. CuFeO2 can be used as adsorption material with high capacity for effective removal of methylene blue from waste water.

    参考文献
    相似文献
    引证文献
引用本文

刘志雄,孙琳,胡洁,肖扬,汤连东,何则强,尹周澜. CuFeO2制备、表征及对亚甲基蓝的吸附性能[J].精细化工,2017,34(4):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-09-25
  • 最后修改日期:2016-12-07
  • 录用日期:2016-12-29
  • 在线发布日期: 2017-03-09
  • 出版日期: