顺酐加氢合成γ-丁内酯的Cu/ZnO-X催化剂研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Study on Cu/ZnO-X catalysts for maleic anhydride hydrogenation to γ-butyrolactone
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用XRD、TPR、BET等方法对几种Cu/Zn催化剂进行表征,考察了催化剂活性与寿命。发现Cu/Zn催化剂添加活性炭可以使顺酐常压气相加氢合成γ-丁内酯(GBL)的反应温度降低至240℃。在优化条件下:液体空速为0.1h-1,氢酐摩尔比为50:1,顺酐转化率100%,GBL选择性为93.28%,催化剂寿命达到2000h以上。

    Abstract:

    A series of Cu/Zn catalysts were characterized by XRD, TPR and BET techniques. The catalytic activity and lifetime of these catalysts were investigated in hydrogenation of maleic anhydride to γ-butyrolactone. Addition of activited carbon into Cu/Zn catalysts could decrease the reaction temperature to 240 ℃. At the optimum condition, which LHSV was 0.1h-1 and ratio of H2/ MA was 50, the conversion of maleic anhydride was 100%, selectivity of γ-Butyrolactone was 93.28% as well as catalyst lifetime was more than 2000 hours.

    参考文献
    相似文献
    引证文献
引用本文

王江兵,陈亿新.顺酐加氢合成γ-丁内酯的Cu/ZnO-X催化剂研究[J].精细化工,2010,27(8):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-03-15
  • 最后修改日期:2010-05-17
  • 录用日期:2010-05-20
  • 在线发布日期: 2010-07-09
  • 出版日期:
文章二维码