尖晶石锰酸锂表面化学镀钴研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖南省教育厅自然科学基金项目(No: 07B060)


Preparation and characterization of spinel LiMn2O4 Co-coated by electroless plating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用表面化学镀钴对LiMn2O4进行改性,采用X-射线衍射、扫描电子显微镜、交流阻抗及恒电流充放电等技术检测和分析合成产物的物相、形貌及电化学性能。研究表明,与未镀钴的LiMn2O4相比,镀钴LiMn2O4 粉末的X射线衍射峰强度有所变弱,样品颗粒表面粗糙,有许多小孔。化学镀钴后的LiMn2O4放电容量由改性前的123 mA•h/g下降到改性后的112 mA•h/g,室温下经20次循环后的容量保持率为96.8%,高于未镀钴的85.8%。55℃经20次高温循环后的比容量保持率为91.7%,远高于未镀钴的76.2%。表面镀钴后LiMn2O4的循环性能得到了显著改善。

    Abstract:

    The Co-coated LiMn2O4 powders were synthesized by electroless plating. The phase, surface morphology and electrochemical properties of the synthesized powders were characterized with x-ray diffraction, scanning electron micrograph, electrochemical impedance spectroscopy and galvanostatic charge-discharge experiments. The Co-coated LiMn2O4 shows a coarse surface with a lot of holes. The specific capacity of Co-coated LiMn2O4 is 112 mA•h/g , which is slightly smaller than 123 mA•h/g for uncoated LiMn2O4. The capacity retention of Co-coated LiMn2O4 is 96.8% and 91.7% respectively after being cycled 20 times at room temperature and the temperature of 55℃, which are much higher than the values of 85.8% and 76.2% for the uncoated one.

    参考文献
    相似文献
    引证文献
引用本文

刘金练.尖晶石锰酸锂表面化学镀钴研究[J].精细化工,2010,27(8):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-03-19
  • 最后修改日期:2010-05-12
  • 录用日期:2010-05-20
  • 在线发布日期: 2010-07-09
  • 出版日期:
文章二维码