NaOH预处理对高岭土表面原位合成SAPO-34催化剂性能的影响
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ426

基金项目:

国家高技术研究开发计划(863计划)(2007AA052326);国家高技术研究发展计划(863计划)


Effect of NaOH pretreatment on the property of SAPO-34 catalyst synthesized by in situ hydrothermal method on the kaolin microspheres
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以高温煅烧高岭土微球(CKM)为载体,采用原位合成法制备负载型SAPO-34催化剂(SCKM)。以2%~10%的NaOH溶液对高岭土微球进行了预处理。采用XRD、XPS、SEM、N2吸附-脱附对NaOH处理的高岭土微球及原位合成的SAPO-34进行了表征,并在MTO固定床上对合成催化剂的活性进行了评价。结果表明,NaOH溶液预处理对高岭土微球表面的化学组成、形貌结构以及原位合成SAPO-34负载型催化剂的性能均有显著的影响。4%NaOH溶液处理高岭土微球表面合成的SAPO-34催化剂(4-SCKM)在MTO催化反应中的活性最佳,甲醇转化率达到100%,低碳烯烃选择性89.8%,单程寿命964min,优于非原位合成的SAPO-34催化剂。

    Abstract:

    SAPO-34/kaolin microspheres catalysts (SCKMs) were in-situ hydrothermally synthesized onto the NaOH-pretreated calcined kaolin microspheres (CKMs). The effect of the NaOH concentration within 2%~10% on the physicochemical properties of CKMs and the ensuing synthesized SCKMs were characterized by means of XRD, XPS, SEM, low-temperature N2 adsorption. The results showed that, NaOH solution had obvious effects on the chemical composition and the morphologies of the CKMs, and then the properties of the in-situ synthesized SAPO-34 catalysts. In comparison, the optimal NaOH concentration was 4%. For the MTO reaction catalyzed by the prepared 4-SCKM catalyst, 100% methanol conversion, 89.8% light olefins selectivity, 964 min lifetime have been obtained, which are better than that of the SAPO-34 catalysts not synthesized by in-situ method.

    参考文献
    相似文献
    引证文献
引用本文

王鹏飞. NaOH预处理对高岭土表面原位合成SAPO-34催化剂性能的影响[J].精细化工,2011,28(10):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-07-04
  • 最后修改日期:2011-08-22
  • 录用日期:2011-08-29
  • 在线发布日期: 2011-09-29
  • 出版日期:
文章二维码