NHPI和磺化酞菁钴催化的环己烷氧化反应
作者:
中图分类号:

O621.25+24.1

基金项目:

中央高校基本科研业务费专项资金资助(10CX04024A);山东省自然科学基金项目(2009ZRA05107)


Oxidation of Cyclohexane Catalyzed by NHPI and CoSPc
Author:
  • 摘要
  • | |
  • 访问统计
  • | |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    以N-羟基邻苯二甲酰亚胺(NHPI)和磺化酞菁钴(CoSPc)组成的催化体系对环己烷的氧化反应进行了研究,通过对反应时间、温度、NHPI用量、磺化酞菁钴用量的考察,得出环己烷氧化的最优反应条件为:反应时间2 h,反应温度80℃,n(环己烷):n(NHPI)=10:1,n(NHPI):n(CoSPc)=6:1。氧化反应产物的组成分析是在气相色谱上用内标法进行的,产物除了环己酮和环己醇外,还发现了乙酸环己酯。在最优反应条件下,环己酮、环己醇、乙酸环己酯的产率及总产率为10.5%、1.1%、0.4%和12.0%。

    Abstract:

    The oxidation of cyclohexane catalyzed by N-hydroxyphthalimide(NHPI) and cobalt sulphonated phthalocyanine(CoSPc) was investigated, in which GC was used to analyze the composition of oxidation products, except the normal products cyclohexanone and cyclohexanol, cyclohexanol acetate was fond and verified, according to standard sample. The effect of reaction time, temperature, the amount of NHPI and/or CoSPc were examined, the optimal reaction conditions of cyclohexane oxidation were as follows: reaction time 2 h, reaction temperature 80℃, n(Cyclohexane) : n(NHPI) = 10:1, n(NHPI) : n(CoSPc) = 6:1. Under the optimal conditions, the 10.5% yield of cyclohexanone, 1.1% of cyclohexanol and 0.4% of cyclohexanol acetate were gotten, and the total yield reached 12.0%.

    参考文献
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

周玉路,林莎莎,夏道宏,项玉芝. NHPI和磺化酞菁钴催化的环己烷氧化反应[J].精细化工,2012,29(1):

复制
分享
文章指标
  • 点击次数:553
  • 下载次数: 0
  • HTML阅读次数: 0
  • 引用次数: 0
历史
  • 收稿日期:2011-10-10
  • 最后修改日期:2011-10-20
  • 录用日期:2011-11-01
  • 在线发布日期: 2011-12-26
文章二维码