聚酯改性丙烯酸聚氨酯2K汽车修补漆的研制
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ630.7

基金项目:

国家自然科学基金青年科学基金项目(51103045);中央高校基本科研业务费资助项目(2012ZM0036)


Preparation of two package acrylic polyurethane Automotive Refinish modified by polyester
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚酯树脂对丙烯酸聚氨酯体系进行改性,制备了一种性能优异的2K汽车修补漆。讨论了丙烯酸树脂、聚酯及其加入量、固化剂、-NCO/-OH值、流平剂、防沉剂对漆膜性能的影响,结果表明:当丙烯酸树脂与CARDURA E10(叔碳酸缩水甘油酯)改性聚酯树脂的质量比在5:1~3:1,以N3390为固化剂且-NCO/-OH的摩尔比为1.08~1.15,丙烯酸流平剂与有机硅流平剂之比为10:3,防沉剂的量为0.54%时,漆膜的性能最佳。

    Abstract:

    A kind of high performance two-package automotive refinish was obtained with polyester resin modified acrylic-polyurethanes. The effect of acrylic resins, polyester resins and its amount, curing agent,the ratio of –NCO/-OH, leveling agents, anti-settling agent on film properties was studied. The results showed that the film had the best performance when the mass ratio of acrylic and polyester resin modified by CARDURA E10 (versatate glycidyl) was 5:1 ~ 3:1, N3390 was used as curing agent and the molar ratio of NCO/-OH was 1.08 ~1.15, the ratio of acrylic leveling agent and silicone leveling agent was 10:3, the quality percentage of anti-settling agent was 0.54%.

    参考文献
    相似文献
    引证文献
引用本文

张静,黄洪.聚酯改性丙烯酸聚氨酯2K汽车修补漆的研制[J].精细化工,2013,30(2):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2012-07-26
  • 最后修改日期:2012-12-16
  • 录用日期:2012-12-20
  • 在线发布日期: 2013-01-30
  • 出版日期:
文章二维码