Cu/CeO2催化剂催化二乙醇胺脱氢制亚氨基二乙酸
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ426.8;O643.38

基金项目:


Dehydrogenation of Diethanolamine to Iminodiacetic Acid over Cu/CeO2 Catalysts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以共沉淀法制备系列铜铈催化剂。采用物理吸附(BET)、X射线衍射(XRD)、H2程序升温还原(H2-TPR)对催化剂的结构和还原性质进行表征。考察Cu/CeO2催化剂上二乙醇胺脱氢制亚氨基二乙酸。结果表明,经500oC焙烧、铜铈摩尔比为3:1的Cu3Ce1催化剂具有较低的还原温度且还原后表面有适量Cu0活性中心,Cu3Ce1催化剂在二乙醇胺(DEA)脱氢制亚氨基二乙酸的反应中具有较好催化活性。反应物的质量比为m(DEA):m(NaOH):m(H2O)=1.15:1:2.42,催化剂样品用量6g,反应温度180oC,反应压力1.1MPa,反应时间4h,搅拌转速600r/min,Cu3Ce1催化剂上二乙醇胺的转化率为99.63%,亚氨基二乙酸选择性为95.73%。

    Abstract:

    A series Cu/CeO2 catalysts were prepared by co-precipitation method. The structure and reduction properties of the catalysts were characterized by physical adsorption(BET), X-ray diffraction(XRD) and H2 temperature programmed reduction(H2-TPR). The catalytic performance of Cu/CeO2 catalysts was investigated for diethanolamine dehydrogenation to iminodiacetic acid. The results showed that Cu3Ce1 catalyst calcined at 500oC with Cu:Ce mole ratio of 3:1 had low reduction temperature, appropriate Cu0 active centers and high catalytic performance for diethanolamine dehydrogenation of iminodiacetic acid. Under the reaction condition of m(DEA):m(NaOH):m(H2O)=1.15:1:2.42, 6g CuO/CeO2 used,reaction temperature of 180oC, reaction pressure of 1.1MPa, reaction time of 4h and rotational speed of 600r/min, the conversion of diethanolamine reached 99.63% and the selectivity of iminodiacetic acid was 95.73%.

    参考文献
    相似文献
    引证文献
引用本文

张鑫驰,於德伟,陈晓蓉,梅华. Cu/CeO2催化剂催化二乙醇胺脱氢制亚氨基二乙酸[J].精细化工,2017,34(9):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-12-13
  • 最后修改日期:2017-03-02
  • 录用日期:2017-03-17
  • 在线发布日期: 2017-08-03
  • 出版日期:
文章二维码