环氧/聚丙烯酸酯乳液的制备及在膨胀型防火涂料的应用
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

福建省中青年教师教育科研项目(JAT160378);福州市科技计划项目(2015-G-63)


Preparation of Epoxy-Polyacrylate Emulsion and Its Application in Intumescent Fire Retardant Coatings
Author:
Affiliation:

Fund Project:

Middle-aged and Young Teachers Education Research Foundation of Fujian Province (JAT160378); Technology Research Project of Fuzhou (2015-G-63)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文以热固性的环氧树脂改性热塑性的丙烯酸酯乳液制备了水性超薄膨胀型钢结构防火涂料专用乳液作为涂层的成膜物质。采用红外光谱(FT-IR)、差示扫描量热分析(DSC)、热重分析(TGA)、扫描电镜(SEM)等方法研究乳液性能及乳液对防火涂料的影响,结果表明:通过环氧改性,提高了乳胶膜的分解温度和玻璃转化温度,使其与膨胀体系更匹配,以环氧改性过的丙烯酸酯乳液作为防火涂料的成膜物质,使得涂层在受热膨胀后能形成致密的、均匀的蜂窝状泡孔,获得较好的耐火性能。

    Abstract:

    The water-based ultra-thin intumescent fire-retardant coating special emulsion was prepared by using thermosetting epoxy resin modified thermoplastic acrylic emulsion as film forming matter. By using FT-IR, DSC, TGA, SEM, the emulsion properties and the effect of emulsion on fireproof coatings were studied. The results show that:the decomposition temperature and glass transition temperature of emulsion membrane were enhanced by epoxy modified,so that it can be match with expansion system. Using epoxy resin modified acrylic ester emulsion as film forming material ,the coating can form a dense, uniform honeycomb bubble hole after thermal expansion, and it achieve good fireproof performance .

    参考文献
    相似文献
    引证文献
引用本文

郑延清,吴锦添,林棋.环氧/聚丙烯酸酯乳液的制备及在膨胀型防火涂料的应用[J].精细化工,2018,35(4):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-03-02
  • 最后修改日期:2017-07-18
  • 录用日期:2017-08-16
  • 在线发布日期: 2018-04-09
  • 出版日期:
文章二维码