BC@CdS复合材料的原位生长制备及光催化性能
DOI:
CSTR:
作者:
作者单位:

广西大学 化学化工学院 广西石化资源加工及过程强化技术重点实验室

作者简介:

通讯作者:

中图分类号:

X703; X52;O643.3

基金项目:

国家自然科学基金(31660183);广西石化资源加工及过程强化技术重点实验室主任基金(2022Z007); 广西大学2023“大学生创新创业训练计划”自治区级创新训练一般项目(S202310593351)


In situ preparation and photocatalytic properties of BC@CdS composites
Author:
Affiliation:

Guangxi Key Laboratory of Petrochemical Resource Processing and Process Strengthening Technology,College of Chemistry and Chemical Engineering,Guangxi University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以生物质气化炭渣为原料,采用原位水热生长策略制备了一系列生物炭(BC)负载硫化镉(CdS)复合材料(BC@CdS)。通过XRD、SEM、BET、XPS、UV-Vis DRS、PL以及EIS等对材料的结构及物化性能进行表征。以左氧氟沙星(LVF)为目标污染物,考察了不同m(BC)∶m(CdS)对BC@CdS光催化性能的影响,进而探究最优光催化性能的BC@CdS的用量、LVF初始质量浓度、体系环境pH值和共存离子以及腐殖酸(HA)等因素对LVF降解率的影响,并测试其循环稳定性和对不同污染物的适用性,最后对BC@CdS光催化降解LVF的机理进行推测。结果表明,CdS纳米颗粒均匀生长在BC表面,有效防止了自身的团聚现象;以m(BC)∶m(CdS)=1∶2制备的BC@CdS-2具有最优光催化性能,在90 min的可见光照射下,20 mg的BC@CdS-2降解质量浓度20 mg/L的LVF(50 mL),LVF降解率可达到90.87%,循环使用5次,LVF降解率为85.45%;BC@CdS-2对质量浓度为20 mg/L的不同污染物(环丙沙星、氧氟沙星、土霉素、盐酸四环素、罗明丹B)降解率为83.57%~93.65%;对体系环境的pH值和共存离子有抗干扰能力。空穴(h+)和超氧自由基(?O– 2)是BC@CdS光催化体系中的主要活性基团。BC@CdS具有光催化活性增强的原因在于,BC作为载体构建的电子传输通道提高了复合材料的光生电子转移速率,并增强了可见光响应,它作为光生电子的受体,促进了CdS本体光生电子-空穴的分离,二者的协同效应提高了CdS的光催化活性与循环稳定性。

    Abstract:

    A series of biochar (BC) supported cadmium sulfide (CdS) composites (BC@CdS) were prepared by in-situ hydrothermal growth strategy using biomass gasification char residue as raw material. The structure and physicochemical properties of the composites were characterized by XRD, SEM, BET, XPS, UV-Vis DRS, PL, and EIS. Taking levofloxacin (LVF) as the target pollutant, the effects of different m(BC)∶m(CdS) on the BC@CdS photocatalytic performance were investigated, and then the effects of the dosage of BC@CdS for the optimal photocatalytic performance, the initial mass concentration of LVF, the pH value of the system environment, co-existing ions and humic acid (HA) on the degradation rate of LVF were investigated, and the cyclic stability of material and its applicability to different pollutants were also investigated. Finally, the mechanism of BC@CdS photocatalytic degradation of LVF was speculated. The results showed that the CdS nanoparticles grew uniformly on the surface of BC, which effectively prevented their own agglomeration. BC@CdS-2 prepared with m(BC)∶m(CdS) = 1∶2 had the best photocatalytic performance which showed that the degradation of LVF (50 mL) with a mass concentration of 20 mg/L could rached to 90.87% by 20 mg BC@CdS-2, and degradation rate of LVF was 85.45% after recycled for 5 times under visible light irradiation for 90min. The degradation rates of different pollutants (ciprofloxacin, ofloxacin, oxytetracycline hydrochloride, romindane B) with mass concentration of 20 mg/L were 83.57%~93.65% by BC@CdS-2. It had anti-interference ability to the pH value of the system environment and co-existing ions. Hole (h+) and superoxide radical (?O– 2) were the main active groups in BC@CdS photocatalytic system. The reason for the enhanced photocatalytic activity of BC@CdS was that the electron transport channel constructed by BC as a carrier increased the photogenerated electron transfer rate and enhanced the visible light response of the composite. At the same time, as the acceptor of photogenerated electrons, it promoted the photogenerated electron-hole separation of CdS body. The synergistic effect of the two improved the photocatalytic activity and cycle stability of CdS.

    参考文献
    相似文献
    引证文献
引用本文

谭岑,黄相如,陈明英,苏亚斌,陆星羽,陈丛瑾. BC@CdS复合材料的原位生长制备及光催化性能[J].精细化工,2024,41(10):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2023-10-17
  • 最后修改日期:2023-12-10
  • 录用日期:2023-11-21
  • 在线发布日期: 2024-09-30
  • 出版日期:
文章二维码