Preparation of sub-micron aluminum hydroxide used in EVA retardant by precipitation
DOI:
CSTR:
Author:
Affiliation:

Clc Number:

TQ320.4

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Abstract:The aluminum nitrate and sodium aluminate solution were used as mainly raw materials, after adding some additive, aluminum hydroxide seed crystal was prepared in the method of neutralization. The sub-micron aluminum hydroxide was prepared by precipitation after the seed crystal was added to sodium aluminate solution. When the additive was acetic acid, the neutralization temperature was 60℃, the stir-ring speed was 400r/min, and the beginning temperature of precipitation was 60℃, the final temperature was 55℃, the total precipitation time were 48 hours, the dosage of seed crystal were 2-3%, the sub-micron aluminum hydroxide with narrow particle size distribution(D50 is about 1.8μm, D90<3.5μm) , suitable BET(BET<5.0m2/g) and completely morphology was prepared. Compared with the EVA retardant alu-minum hydroxide from foreign country, the particle size distribution, BET, oil absorption and morphology of both products were similar. So the aluminum hydroxide prepared in test had a chance to replace the for-eign products.

    Reference
    Related
    Cited by
Get Citation
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:April 10,2019
  • Revised:June 18,2019
  • Adopted:June 19,2019
  • Online: November 06,2019
  • Published:
Article QR Code