Page 161 - 201902

第 2 期 鲁哲宏，等: 苯并嗪协效二乙基次磷酸铝阻燃 PA66 的研究 ·327·

品的弯曲模量变化较小，弯曲强度下降幅度不到 24(1): 27-36.
[8] Tang G, Wang X, Jiang S D, et al. Thermal degradation and
10%，而拉伸强度和缺口冲击强度下降明显，这是 combustion behaviors of flame retarded glass fiber reinforced
polyamide 6 composites based on cerium hypophosphite[J]. Polymer
由于阻燃剂与基体界面相容性不好，分散不均，导 Composites, 2016, 37(10): 3073-3082.
致界面能提高，因而力学性能下降。综合考虑复合 [9] Huang W J, He W T, Long L J, et al. Highly efficient flame-retardant
glass-fiber-reinforced polyamide 6T system based on a novel
材料的力学性能，当 ADP 的质量分数为 8%时复合 DOPO-based derivative: Flame retardancy, thermal decomposition,
and pyrolysis behavior[J]. Polymer Degradation & Stability, 2018,
材料力学性能最佳，其拉伸强度、弯曲强度、弯曲 148: 26-41.
[10] Lu Zhehong (鲁哲宏), Ban Dasai (班大赛), Li Hao (李豪), et al.
模量和缺口冲击强度分别为 83.49 MPa、119.75 MPa、 Research progress of flame retardant modified nylon[J].Chemical
2
2695 MPa、5.124 kJ/m 。添加 BOZ 后拉伸强度、弯 Research (化学研究)，2018, 29(3): 310-316.
[11] Xiao X, Hu S, Zhai J G, et al. Thermal properties and combustion
曲强度和弯曲模量变化幅度均不大，但缺口冲击强 behaviors of flame-retarded glass fiber-reinforced polyamide 6 with
piperazine pyrophosphate and aluminum hypophosphite[J]. Journal
度随 BOZ 添加量的增多而显著下降。当阻燃剂总添 of Thermal Analysis & Calorimetry，2016, 125(1): 1-11.
[12] Kaynak C, Polat O. Influences of nanoclays on the flame retardancy
加量保持质量分数为 8%（0.3% BOZ 和 7.7% ADP 复配） of fiber-filled and unfilled polyamide-6 with and without aluminum
diethylphosphinate[J]. Journal of Fire Sciences, 2015, 33(2): 87-112.
#
时，试样 4 的拉伸强度、弯曲强度、弯曲模量和缺 [13] Jin Song (金松), Xiang Yushu (向宇姝), Yu Jie (于杰), et al.
口冲击强度分别为 81.52 MPa、111.11 MPa、2700 MPa、 Synthesis of a novel alkyl-substituted phosphinate and its application
in PA6[J]. China Plastics Industry（塑料工业），2017, 45(1): 9-13.
#
2
4.981 kJ/m ，与试样 2 相比，力学性能变化不大， [14] Zou L Y, Zhou M, Liu J Y, et al. Flame-retardant thermoplastic
polyester based on multiarm aluminum phosphinate for improving
表明少量添加 BOZ 对材料的力学性能影响较小。 anti-dripping[J]. Thermochimica Acta, 2018, 664: 118-127.
[15] Cheng Baofa (程宝发), Ma Tenghao (马腾昊), Li Xiangmei (李向
3 结论 梅), et al. Flame retardant performance of PA 6/ADP composites[J].
China Synthetic Resin and Plastics (合成树脂与塑料), 2016, 33(4): 24-28.
[16] Wang Junliang (王军亮), Lu Zhehong (鲁哲宏), Li Hao (李豪), et
al. Research progress of polybenzoxazines: design and synthesis[J].
（1）ADP 对 PA66 有良好的阻燃性能，添加质 Chemical Research (化学研究)，2018, 29(2): 213-220.
量分数 8% ADP 时，PA66/ADP 复合材料不仅保持 [17] Zhang H C, Gu W,Zhu R Q, et al.Nitrogen configuration of
polybenzoxazine carbide[J]. High Temperature Materials and
良好的力学性能，UL94 测试达到了 V-0 级，LOI Processes，2015, 34(3): 245-250.
[18] Wang Junliang (王军亮),Lu Zhehong (鲁哲宏), Li Hao (李豪), et al.
也达到了 30.3%。 Progress on flame retardant modification of polybenzoxazines[J].
Polymer Materials Science & Engineering (高分子材料科学与工
（2）成炭剂 BOZ 和 ADP 具有很好的复配协效 程), 2018, 34(5): 183-190.
阻燃作用，并且协同效果和二者的配比有关。其阻 [19] Kiskan B, Yagci Y. Self-healing of poly(propylene oxide)-
polybenzoxazine thermosets by photoinduced coumarine dimerization[J].
燃机理是以气相阻燃作用为主的气相和凝聚相协同 Journal of Polymer Science, Part A: Polymer Chemistry, 2015,
52(20): 2911-2918.
阻燃机制。当 BOZ 的质量分数为 0.3%，ADP 质量 [20] Hu Xiaolan (胡晓兰), Lan Qian (兰茜), Liu Gang (刘刚), et al.
Flame retardant modification of benzoxazine resin and its glass fiber
分数为 7.7%时，二者复配阻燃 PA66 复合材料的垂 reinforced composites[J]. Acta Materiae Compositae Sinica (复合材
料学报)，2015, 32(6): 1714-1720.
直燃烧达到 UL94 V-0 级，LOI 达到了 32.8%， [21] Takeichi T, Kawauchi T, Agag T. High performance polybenzoxazines
2
2
pkHRR 由 1168.16 kW/m 下降到 517.48 kW/m ， as a novel type of phenolic resin[J]. Polymer Journal，2008, 40(12):
1121-1131.
2
2
THR 由 151.39 MJ/m 下降到 150.32 MJ/m ，并且力 [22] Kimura H, Matsumoto A, Hasegawa K, et al. New thermosetting
resin from bisphenol A-based benzoxazine and bisoxazoline[J].
学性能保持良好。可见，BOZ 的引入不但可以促进 Journal of Applied Polymer Science, 1999, 72(12): 1551-1558.
提高复合材料的阻燃性能，还能改善其初始热稳定 [23] Standardization Administration of the People's Republic of China (中
国国家标准化管理委员会). Plastics—Determination of burning
性，对力学性能的影响也不大，后续还可以对 BOZ characteristics—characteristics—Horizontal and vertical test(塑
料燃烧性能的 测定水平法和 垂直法): GB/T2408-2008[S].
进行结构设计和化学改性进一步提高其协同效果。 Beijing: Standards Press of China (北京: 中国标准出版社), 2008: 8-4.
[24] Standardization Administration of the People's Republic of China(中
国国家标准化管理委员会). Plastics—Determination of burning
参考文献: behaviour by oxygen index—Part 2:Ambient-temperature test
[1] Kelnar I, Stephan M, Jakisch L, et al. Ternary reactive blends of (塑料用氧指数法测定燃烧行为第 2 部分: 室温试验): GB/T
nylon-6 matrix with dispersed rigid brittle polymer and elastomer[J]. 2406. 2-2009[S]. Beijing：Standards Press of China (北京: 中国标准
Journal of Applied Polymer Science, 1999, 74(6): 1404-1411. 出版社), 2009: 6-15.
[2] Chen J, Wu W, Chen C, et al. Toughened nylon66/nylon6 ternary [25] International Organization for Standardization.Reaction to fire
tests-Heat release, smoke production and mass loss rate-Part 1:
nanocomposites by elastomers[J]. Journal of Applied Polymer Heat release rate(Cone calorinmeter method) and smoke
Science, 2010, 115(1): 588-598. production rate(dynamic measurement) 〔对火反应试验—热释
[3] Chow W S, Ishak Z A M.Polyamide blend-based nanocomposites 放、产烟量及质量损失率,第 1 部分: 热释放速率(锥形量热仪
&58：A review[J]. Express Polymer Letters，2015, 9(3): 211-232. 法)〕: ISO5660-1:2015[S]. 2015:3-31.
[4] Rathi S, Dahiya J B. Effect on thermal behaviour of polyamide [26] Standardization Administration of the People's Republic of China (中
66/clay nanocomposites with inorganic flame retardant additives[J]. 国国家标准化管理委员会).Plastics—Determination of tensile
Indian Journal of Chemistry，2012, 51(12): 1677-1685. properties—Part 1:General principles (塑料-拉伸性能的测定第
[5] Kelnar I, Stephan M, Jakisch L, et al. Influence of the component 1 部分: 总则): GB/T1040.1-2006[S]. Beijing: Standards Press of
reactivity on the properties of ternary reactive blends Nylon 6/rigid China (北京: 中国标准出版社), 2006: 8-24.
brittle polymer/elastomer[J]. Journal of Applied Polymer Science, [27] Standardization Administration of the People's Republic of China (中
2000, 78(9): 1597-1603. 国国家标准化管理委员会).Plastics—Determination of flexural
[6] Zhan Z S, Li B, Xu M J, et al. Synergistic effects of nano-silica on properties (塑料-弯曲性能的测定): GB/T9341-2008[S]. Beijing：
aluminum diethylphosphinate/polyamide 66 system for fire Standards Press of China（北京：中国标准出版社）, 2008: 8-4.
retardancy[J]. High Performance Polymers, 2016, 28(2): 140-146. [28] Standardization Administration of the People's Republic of China (中
[7] He W T, Zhu H, Zhang P C, et al. Pyrolysis and flammability 国国家标准化管理委员会). Plastics-Determination of charpy
behavior of long (glass fiber)-reinforced polyamide 6 by aluminum impact properties( 塑料-简支梁 冲击性能的测 定 ): GB/T
alkylphosphinate-based flame retardants in combination with organic 1043-2008[S]. Beijing: Standards Press of China (北京: 中国标准
montmorillonite[J]. Journal of Vinyl & Additive Technology, 2018, 出版社), 2008: 8-4.