Page 239 - 精细化工2019年第9期

第 9 期 张洪礼，等: 丙烯酸酯改性交联型水性聚氨酯胶黏剂 ·1967·

Adhesives, 2018, 85: 165-176.
[4] Cakic S, Ristic I S, Cincovic M M, et al. Glycolyzed poly(ethylene
terephthalate) waste and castor oil-based polyols for waterborne
polyurethane adhesives containing hexamethoxymethyl melamine[J].
Progress in Organic Coatings, 2015, 78: 357-368.
[5] Fu H, Wang Y, Chen W, et al. A novel silanized CoFe 2O 4/fluorinated
waterborne polyurethane pressure sensitive adhesive[J]. Applied
Surface Science, 2015, 351: 1204-1212.
[6] Ruanpan S, Manuspiya H. Synthesized amino-functionalized porous
clay heterostructure as an effective thickener in waterborne polyurethane
hybrid adhesives for lamination processes[J]. International Journal of
Adhesion and Adhesives, 2018, 80: 66-75.
[7] Rasmika P, Parth K. Waterborne polyurethanes: A three step synthetic
图 7 WPU 与丙烯酸酯不同质量比（WPUA0~5）、不同
approach towards environmental friendly flame retardant coatings[J].
交联剂用量（WPUA4、WPUA6~8）样品的 T-型剥 Progress in Organic Coatings, 2018, 125: 186-194.
离强度 [8] Yin X, Dong C H, Chai C P, et al. Thermostability and flame
Fig. 7 T-peel strength of the adhesives with different mass retardance of green functional two-component waterborne
ratios of waterborne polyurethane to acrylate (WPUA0~5) polyurethane coatings with nanoparticles[J]. Progress in Organic
and different crosslinker dosage (WPUA4, WPUA6~8) Coatings, 2018, 122: 119-128.

[9] Deng Y, Zhou C, Zhang M, et al. Effects of the reagent ratio on the
3 结论 properties of waterborne polyurethanes-acrylate for application in
damping coating[J]. Progress in Organic Coatings, 2018, 122: 239-
247.
–1
（1）红外光谱在 812 cm 出现了三嗪环特征吸
[10] Yong Q, Liao B, Huang J, et al. Preparation and characterization of a
收峰，证明了三聚氰胺成功引入 WPU 中，合成了 novel low gloss waterborne polyurethane resin[J]. Surface & Coatings
三聚氰胺为交联剂的 WPUA。 Technology, 2018, 341: 78-85.
[11] Heck C A, Dos Santos J H Z, Wolf C R. Waterborne polyurethane:
（2）研究了 WPU 与丙烯酸酯质量比、三聚氰
The effect of the addition or in situ formation of silica on mechanical
胺添加量对胶黏剂性能的影响。随着丙烯酸酯的质 properties and adhesion[J]. International Journal of Adhesion and
量增多，乳液粒径逐渐变大，拉伸强度由 34.5 MPa Adhesives, 2015, 58: 13-20.
[12] Sun F, Yang J, Zhang H, et al. Multi-functional composite aerogels
下降到 19.3 MPa，断裂伸长率由 789%增长到 917%，
enabled by chemical integration of graphene oxide and waterborne
邵氏硬度 A 由 83 下降到 60，发生 5%质量分数降解 polyurethane via a facile and green method[J]. Composites Science
的温度由 278℃提高到 323 ℃，吸水率由 6.56%下 & Technology, 2018, 165: 175~182.
[13] Alvarez G A, Fuensanta M, Orozco V H, et al. Hybrid waterborne
降到 4.69%，T-型剥离强度为 5.3 kN/m。三聚氰胺
polyurethane/acrylate dispersion synthesized with bisphenol
的添加量对复合胶黏剂的耐热性与耐水性影响甚 A-glicidylmethacrylate (Bis-GMA) grafting agent[J]. Progress in
微，但可以明显改善复合胶黏剂的粘接性能。当 m Organic Coatings, 2018, 118: 30-39.
[14] Degrandicontraires E, Udagama R, Mckenna T F, et al. Influence of
（WPU）∶m（PA）=6∶4、三聚氰胺占 WPU 质量
composition on the morphology of polyurethane/acrylic latex
为 0.53%时，胶黏剂的综合性能最优。 particles and adhesive films[J]. International Journal of Adhesion and
合成的新型复合胶黏剂不仅降低了胶黏剂的成 Adhesives, 2014, 50: 176-182.
本，而且提高了粘接性能、耐热性能以及耐水性能， [15] Ai Wei (艾罡). Synthesis of high viscosity heat-resistant polyurethane
adhesive[D]. Taiyuan：North University of China (中北大学), 2012.
为应用于软包装提供了一种新型胶黏剂。 [16] Yao Jiyan (姚机艳), Lin Qiang (林强), Zhang Liangliang (张良良),
et al. Preparation and properties of melamincross-linked modified
参考文献： waterborne polyurethane[J]. Plating & Finishing (电镀与涂饰),
[1] Shin M, Lee Y, Rahman M, et al. Synthesis and properties of 2016, 35(22): 1152-1157.
waterborne fluorinated polyurethane-acrylate using a solvent-/ [17] Wang Y Y, Qiu F X, Xu B B. Preparation, mechanical properties and
emulsifier-free method[J]. Polymer, 2013, 54(18): 4873-4882. surface morphologies of; waterborne fluorinated polyurethane-acrylate
[2] Zhang S, Wang R, He Y, et al. Waterborne polyurethane-acrylic [J]. Progress in Organic Coatings, 2013, 76(5): 876-883.
copolymers crosslinked core–shell nanoparticles for humidity-sensitive [18] Fang Z H, Duan H Y, Zhang Z H, et al. Novel heat-resistance UV
coatings[J]. Progress in Organic Coatings, 2013, 76(4): 729-735. curable waterborne polyurethane coatings modified by melamine[J].
[3] Fuensanta M, Jofrereche J A, Rodriguezllansola F, et al. Structure Applied Surface Science, 2011, 257(11): 4765-4768.
and adhesion properties before and after hydrolytic ageing of [19] Zhang T, Wu W, Wang X, et al. Effect of average functionality on
polyurethane urea adhesives made with mixtures of waterborne properties of UV-curable waterborne polyurethane-acrylate[J].
polyurethane dispersions[J]. International Journal of Adhesion and Progress in Organic Coatings, 2010, 68(3): 201-207.