Page 207 - 精细化工2019年第9期

第 9 期 罗攀登，等: 多氨基硼交联剂的制备与性能评价 ·1935·

参考文献：
[1] Zhang Ying (张颖), Chen Dajun (陈大钧), Liu Yanfeng (刘彦锋), et
al. Laboratory research for low-concentration guanidine gum
fracturing fluids[J]. Applied Chemical Industry (应用化工), 2013,
42(10): 1836-1838.
[2] Li Jingna (李景娜), Zhang Jinsheng (张金生), Li Lihua (李丽华), et
al. Synthesis of organic borate crosslinker for hydrofracturing fluid[J].
Speciality Petrochemicals (精细石油化工), 2013, 30(5): 33-36.
[3] Chen Fu (陈馥), He Kunyi (何坤忆), Luo Mina (罗米娜), et al.
Preparation and performance evaluation of microsphere organic
boron crosslinking agent[J]. Speciality Petrochemicals (精细石油化
工), 2018, 35(5): 6-9.
[4] Zhu Lunyu (祝纶宇), Yi Zhuo (伊卓), Zhang Wenlong (张文龙).
Preparation and properties of organic boron high temperature delayed

图 8 交联剂的核磁共振硼谱 crosslinking agents[J]. Petrochemical Technology (石油化工), 2017,
46 (11): 1413-1418.
11
Fig. 8 BNMR spectra of crosslinkers [5] He Qing (何青), Yao Changyu (姚昌宇), Yuan Xu (袁胥), et al.
Progress on cross-linker in hydro-fracturing fluid system[J]. Oilfield
未老化样品中未出现δ19 的吸收峰，说明未老 Chemistry (油田化学), 2017, 34(1): 184-190.
[6] Du Jing (杜静). Preparation of a crosslinker and study of its synthesis
化样品中不存在游离的硼酸酯 [11,19] 。在 160 ℃老化 properties on guar gum fracturing fluid[D]. Kaifeng: Henan
University (河南大学), 2018.
2 h 后样品未出现δ1.25 的吸收峰（四羟基硼离子的 [7] Lie C, Clark P. Fracturing-fluid crosslinking at low polymer
吸收峰），说明未老化样品中的 N—B 结构热稳定性 concentration[C]//SPE Annual Technical Conference and Exhibition,
2005: 96937.
较好。经过 80 ℃老化，样品中δ15 左右的吸收峰 [8] Sun H, Qu Q. High-efficiency boron crosslinkers for low-polymer
fracturing fluids[C]//SPE International Symposium on Oilfield
（与 N 相连硼酸酯的吸收峰）强度显著降低，出现 Chemistry, 2011: 140817.
了δ9.5（与 N 相连羟基硼的吸收峰）和δ6.5（与 N [9] Legemah M, Guerin M, Sun H, et al. Novel high-efficiency boron
crosslinkers for low-polymer-loading fracturing fluids[J]. SPE
相连硼酸盐的吸收峰）的吸收峰，说明样品中部分 Journal, 2014, 19 (4): 737-743.
[10] Bai Haitao (白海涛), Zhao Jianping (赵建平), Tian Peirong (田培
硼酸酯结构在碱性、高温下转变成硼羟基结构；提高 蓉 ), et al. Synthesis and application of organic amine boron
老化温度到 140 ℃，样品中硼酸酯结构基本转变成硼 crosslinker AB-1[J]. Fine Chemicals (精细化工), 2015, 32(10):
1157-1161.
羟基 [11] 。由此可见，本文制备的多氨基硼交联剂中 [11] Legemah M, Qu Q, Sun H, et al. Unusual high-pressure toleranace of
polyboronic crosslinked gel under high-temperature rheology
N—B 结构稳定，交联剂具有良好的热稳定性能。 condition[C]//SPE International Symposium on Oilfield
Chemistry,2015: 173708.
3 结论 [12] Zhang Z F, Pan H, Liu P S, et al. Boric acid incorporated on the
surface of reactive nanosilica providing a nano-crosslinker with
potential in guar gum fracturing fluid[J]. Journal of Applied Polymer
（1）以多乙烯多胺、乙二醇、硼酸为原料合成 Science, 2017, 134(27): 45037.
[13] National Development and Reform Commision (国家发展和改革委
多氨基硼交联剂 BNX-1。确定最佳反应条件为：多 员会). Recommended parctices on measuring the properties of
water-based fracturing fluid: SY/T 5107 — 2005[S]. Beijing:
胺物质为多乙烯多胺，m（硼酸酯）∶m（多乙烯多 Petroleum Industry Press (石油工业出版社), 2005.
胺）=3∶2、反应时间 4 h、反应温度 150 ℃。对合 [14] National Development and Reform Commision (国家发展和改革委
员会). General technical specifications of fracturing fluids:SY/T
成产物进行核磁共振氢谱和红外光谱分析，结果表 6376—2008[S]. Beijing: Petroleum Industry Press (石油工业出版
社), 2008.
明产物分子结构与设计结构一致。 [15] Lorand J, Edwards J. Polyol complexes and structure of the
（ 2 ） 将合成 的多氨基 硼交联剂 BNX-1 benzeneboronateion[J]. Journal of Organic Chemistry, 1959, 24 (6):
769-774.
〔m(HPG)∶m(交联剂)=100∶0.4〕应用于压裂液体系 [16] Cambre J, Sumerlin B. Biomedical applications of boronic acid
polymers[J]. Polymer, 2011, 52(21): 4631-4643.
（羟丙基胍胶质量分数 0.35%），并进行黏度测试， [17] Dong Jingfeng (董景锋), Wang Zhichen (汪志臣), Yi Baoan (怡宝
–1
在 140 ℃、170 s 下，压裂液黏度为 145 mPa·s， 安), et al. Development and application of guar gum fracturing fluid
with low concentration[J]. Oilfield Chemistry (油田化学), 2017,
剪切 120 min 后，压裂液黏度为 122 mPa·s，工业交 34(1): 43-47.
[18] Williams N, Kelly P, Berard K, et al. Fracturing fluid with
联剂 TCB-1 在相同剪切条件下体系的黏度为 98 low-polymer loading using a new set of boron crosslinkers:
mPa·s〔羟丙基胍胶质量分数 0.5%，m(HPG)∶m(交 laboratory and field studies[C]//SPE International Symposium and
Exhibition on Formation Damage Control, 2012: 151715.
联剂)=100∶0.5〕。压裂液体系性能评价结果表明， [19] Bishop M, Shahid N, Yang J, et al. Determination of the mode and
11
efficacy of the cross-linking of guar by borate using MAS BNMR
体系的破胶性能和静态滤失性能均满足 SY/T 6376 of borate cross-linked guar in combination with solution BNMR of
11
—2008《压裂液通用技术条件》的要求。 model systems[J]. Dalton Transactions, 2004, 33(17): 2621-2634.
[20] Legemah M, Sun H, Guerin M. Fracturing method using polyboronic
（3）核磁共振硼谱表明，交联剂分子中的 N—B compound: US9534167B2[P]. 2017-01-03.
结构在 160 ℃下具有良好的热稳定性。本文制备的 [21] Ogle J, Holtsclaw J, Loveless D. Oligomeric and polymeric
electronically-modified boronic acids and methods of using the same:
多氨基硼交联剂可以显著降低压裂液体系中胍胶的 US9027644B2[P]. 2015-05-12.
[22] Loveless D, Saini R, Weaver J. Multifunctional boronic crosslinkers
用量，在压裂施工现场具有很好的应用潜力。 and associated methods: US8424603B2[P]. 2013-04-23.