Page 113 - 201811
P. 113

第 11 期                    王明远,等:  磷化镍的制备及其催化糠醛加氢制备环戊酮                                   ·1899·


                   表 2  Ni-P 催化剂使用前、后的结构特性                         Green Chemistry, 2015, 17(8): 4183-4188.
              Table 2    Properties of the fresh and reused Ni-P catalyst   [11]  Guo J, Xu G, Han Z,  et al. Selective conversion of furfural to
                                                                   cyclopentanone with CuZnAl catalysts[J]. Acs Sustainable Chem
                                   2
                                              3
                催化剂       比表面积/(m /g)    孔容/(m /g)   孔径/nm         Eng, 2014, 2(10): 2259-2266.
                                                               [12]  Li Mengjie (李孟杰), Zhao Huiji (赵会吉), Ding Ning (丁宁),   et
                使用前          20.542       0.1403    16.05
                                                                   al. Selective hydrogenation of furfural to synthesize cyclopentanone
              使用 5 次后        11.566       0.0564    19.50          and cyclopentanol over raney copper catalyst [J]. Fine Chemicals (精
                                                                   细化工), 2015, 32(1): 116-120.
                                                               [13]  Li Yuna (李玉娜), Liu Zili (刘自力), Zuo Jianliang (左建良), et al.
            3   结论                                                 Preparation of Ni-Cu-B amorphous alloy catalysts and their catalytic
                                                                   hydrogenation of furfural to cyclopentanone [J]. Journal of Chemical
                                                                   Engineering of Chinese Universities  (高校化学工程学报), 2017,
                 采用溶剂热法制备得到的 Ni-P 催化剂对糠醛                           31(1): 74-82.
                                                               [14]  Ma Jie (马杰). Study on preparation  and hydrogenation of novel
            加氢制备环戊酮具有良好的催化活性,通过 XRD、                               nickel phosphide catalyst[D]. Zhengzhou: Zhengzhou University (郑
            SEM、TEM、H 2 -TPR、H 2 -TPD、N 2 吸附-脱附、XPS                州大学), 2016.
                                                               [15]  Guan Q, Li W,  Zhang M,  et al. Alternative synthesis of bulk and
            对催化剂进行了表征,Ni-P 催化剂颗粒直径为                                supported  nickel phosphide from the thermal decomposition  of
            80~90 nm,为介孔结构,有明显的堆积孔;催化剂                             hypophosphites[J]. Journal of Catalysis, 2009, 263(1): 1-3.
                                                               [16]  Krishnan K H, John S, Srinivasan K N, et al. An overall aspect of
            的活化温度为 350 ℃,远低于传统程序升温还原法                              electroless Ni-P depositions-A review article[J]. Metallurgical &
            制备 Ni-P 催化剂的活化温度。                                      Materials Transactions A, 2006, 37(6): 1917-1926.
                                                               [17]  Li Zhenyu (李振雨). Study on the preparation characterization and
                 糠醛加氢制备环戊酮的最优工艺条件为:以水                              hydrodeoxygenation performance of supported nickel phophide
                                                                   (Ni 2P) catalysts[D]. Qingdao: Qingdao University of Science &
            作为溶剂,原料与催化剂质量比为 12,在反应温度                               Technology (青岛科技大学), 2016.
            150 ℃、反应压力 2.0 MPa、转速 600 r/min 的条件                [18]  Sawhill S  J, Layman K A,  Wyk  D R V,  et al. Thiophene
                                                                   hydrodesulfurization over nickel phosphide catalysts: effect of the
            下反应 4 h,糠醛转化率为 98.87%,环戊酮收率为                           precursor composition and support[J]. Journal of Catalysis, 2005,
            68.65%。对催化剂进行稳定性测试,4 次重复使用                             231(2): 300-313.
                                                               [19]  Xu Yanli (许燕丽), Wang Xitao (王希涛). Dehydrogenation of
            之后环戊酮收率仍能达到 65.40%。虽然本体 Ni-P                           isobutane to isobutene over nickel phosphide catalyst in the presence
                                                                   of hydrogen[J]. Chemical Industry and Engineering (化学工业与工
            催化剂具有较高的活性,但其表面结构以及孔道不
                                                                   程), 2016, 33(2):17-22.
            够稳定影响其重复使用能力,可以通过负载(载体                             [20] Liu Jun(刘俊), Wang Liangliang (王亮亮), Fei Zhaoyang (费兆阳),
                                                                   et al. Structure and properties of amorphous CeO 2 @ TiO 2 catalyst
            为二氧化钛,分子筛等)对催化剂进行优化和改进。                                and its performance in the selective catalytic reduction of NO with
                                                                   NH 3[J]. Journal of Fuel Chemistry and Technology (燃料化学学报),
            参考文献:                                                  2016, 44(8): 954-960.
                                                               [21]  Yu Qi (于祺), Song Hua (宋华), Song Hualin (宋华林), et al. Effect
            [1]   Liu S J(刘世娟), Wang Y(王玉). The exploration of the synthesis of   of reduction temperature on the performance of Ni 2P /Ti-MCM-41
                 cyclopentanone under microwave[J]. Jilin Normal University Journal   catalyst in hydrodesulfurization[J]. Journal of Fuel Chemistry and
                 ( Natural Science Edition) (吉林师范大学学报:自然科学版), 2016,   Technology (燃料化学学报), 2016, 44(8): 970-976.
                 37(2): 97-99.                                 [22]  Cecilia J A, Jiménez-Morales I, Infantes-Molina A, et al. Influence of
            [2]   Sui C, Lu G, Li X Y. Selective oxidation of cyclopentene catalyzed   the silica support on the activity of Ni and Ni 2P based catalysts in the
                 by Pd(CH 3COO) 2-NPMoV under oxygen atmosphere[J].  Reaction   hydrodechlorination of chlorobenzene. Study of factors  governing
                 Kinetics & Catalysis Letters, 2008, 94(2): 191-198.     catalyst deactivation[J]. Journal of Molecular Catalysis A Chemical,
            [3]   Duan  Y, Song J,  Yin B,  et al. Oxidation  of cyclopentene to   2013, 368/369(1): 78-87.
                 cyclopentanone catalyzed by PdCl 2-CuCl 2  system[J]. Petrochemical   [23]  Song H, Dai M, Guo Y  T,  et al. Preparation of  composite
                 Technology, 2011, 40(3): 289-294.
            [4]   Chen Kang (陈康), Zhao Dongjiang  (赵东江), Yang Bin (杨彬),     TiO 2-Al 2O 3, supported nickel phosphide hydrotreating catalysts and
                 et al .Study on the synthesis of new acaricidal myzus mites[J]. Fine   catalytic activity for hydrodesulfurization of dibenzothiophene[J].
                                                                   Fuel Processing Technology, 2012, 96(3): 228-236.
                 Chemical Intermediates (精细化工中间体), 2010, 40(3): 18-20.
            [5]   Hronec M, Fulajtarová K. Selective  transformation  of  furfural to   [24]  Wang Y, Sang S, Zhu W, et al. CuNi@C catalysts with high activity
                                                                   derived from metal–organic frameworks precursor for conversion of
                 cyclopentanone[J]. Catalysis Communications, 2012, 24(26): 100-104.
            [6]   Diao Chunxia (刁春霞), Xu Zehui (徐泽辉). Study on production   furfural to cyclopentanone[J]. Chemical Engineering Journal, 2016,
                 process of cyclopentanone[J]. Petrochemical  Technology &   299: 104-111.
                 Economy (石油化工技术与经济), 2011, 27(5): 52-56.      [25]  Liu L,  Lou H,  Chen M. Selective  hydrogenation of furfural to
            [7]   Lin N, Santoro F, Zhao X,  et al.  Vibronically resolved electronic   tetrahydrofurfuryl alcohol over Ni/CNTs and bimetallic Cu, Ni/CNTs
                 circular dichroism spectra of (R)-(+)-3-methylcyclopentanone: a   catalysts [J]. International Journal of Hydrogen Energy, 2016, 41(33):
                 theoretical study[J]. Journal of Physical Chemistry A, 2008, 112(48):   14721-14731.
                 12401-12411.                                  [26]  Nadgeri J M, Biradar N S, Patil P B,  et al.  Control of competing
            [8]   Zhang Zhennan (张振男). Study on the hydrogenation rearrangement   hydrogenation of phenylhydroxylamine to aniline in a single-step
                 of furfural and furfuryl alcohol to synthesize cyclopentanone[D].   hydrogenation of  nitrobenzene to  p-aminophenol[J]. Industrial &
                 Dalian: Dalian Maritime University (大连海事大学), 2016.   Engineering Chemistry Research, 2011, 50(9): 5478-5484.
            [9]   Hronec M, Fulajtárová K, Vávra I,  et al. Carbon  supported Pd-Cu   [27]  Zhou M, Zhu H, Lei N, et al. Catalytic hydroprocessing of furfural to
                 catalysts for highly selective rearrangement of furfural to   cyclopentanol over Ni/CNTs catalysts: model reaction for upgrading
                 cyclopentanone[J]. Applied Catalysis B Environmental,  2016, 181:   of bio-oil[J]. Catalysis Letters, 2014, 144(2): 235-241.
                 210-219.                                      [28]  Cueto J, Faba L,  Díaz E,  et al. Cyclopentanone as an  alternative
            [10]  Fang R, Liu H, Luque R, et al. Efficient and selective hydrogenation   linking reactant for  heterogeneously catalyzed furfural aldol
                 of biomass-derived furfural to cyclopentanone using Ru catalysts[J].     condensation[J]. Chemcatchem, 2017, 9(10): 1765-1770.
   108   109   110   111   112   113   114   115   116   117   118