Page 113 - 201904
P. 113
第 36 卷第 4 期 精 细 化 工 Vol.36, No.4
201 9 年 4 月 FINE CHEMICALS Apr. 2019
表面活性剂
直链型偶氮苯聚氧乙烯醚稳泡剂的制备及表面活性
*
费 良,陈少瑜,殷允杰,王潮霞
(江南大学 生态纺织教育部重点实验室,江苏 无锡 214122)
摘要:以 4-羟基偶氮苯、1,2-二溴乙烷、PEG-600 为原料,合成直链型偶氮苯聚氧乙烯醚非离子表面活性剂
(PEP-600)。通过红外光谱和核磁共振氢谱表征了其结构,并测试了其表面活性。结果表明,PEP-600 临
2
–3
–3
界胶束浓度(CMC)为 4.9910 mol/L,在 CMC 处表面张力为 48.09 mN/m,饱和吸附量为 2.4810 mmol/m ,
亲水亲油平衡值(HLB)为 14.20。将 PEP-600 与 0.1 g/L 的十二烷基硫酸钠复配最大发泡比为 12,泡沫半
衰期为 220 s 左右,直链型分子结构的 PEP-600 在泡沫液膜表面排列紧密,具有优异的起泡性能,可用作
泡沫染整稳泡剂。
关键词:偶氮苯;聚氧乙烯醚;非离子表面活性剂;稳泡剂
中图分类号:TQ423.2 文献标识码:A 文章编号:1003-5214 (2019) 04-0639-05
Synthesis and Surface Activity of Linear-type Azobenzene
Polyoxyethylene Ether Foam Stabilizer
*
FEI Liang, CHEN Shao-yu, YIN Yun-jie, WANG Chao-xia
(Key Laboratory of Eco-Textiles, Ministry of Education, Jiangnan University, Wuxi 214122, Jiangsu, China)
Abstract: A linear-type azobenzene polyoxyethylene ether nonionic surfactant (PEP-600), as a foam
stabilizer was synthesized using p-hydroxyazobenzene, 1, 2-dibromoethane and polyethylene glycol
1
(PEG-600) as raw materials. Its structure was characterized by FTIR and HNMR. Its surface activity and
foam properties were analyzed. The results showed that the critical micelle concentration (CMC) of
–3
PEP-600 was 4.99×10 mol/L and the surface tension at CMC was 48.09 mN/m. The surface excess and
2
HLB value of PEP-600 were 2.48×10 –3 mmol/m and 14.20, respectively. Meanwhile, the maximum
foaming ratio of PEP-600 with sodium dodecyl sulfate (0.1 g/L) was about 12 and the foam half-life was
220 s, meaning that PEP-600 had excellent foaming property, which was attributed to the tight arrangement
at the surface of foam film. So, PEP-600 had the potential to apply in foam dyeing as a foam stabilizer.
Key words: azobenzene; polyoxyethylene ether; nonionic surfactant; foam stabilizer
Foundation item: Fundamental Research Funds for the Central Universities (JUSRP51724B)
[1]
[2]
[3]
泡沫广泛用于食品 、泡沫浮选 、精细化工 、 能力。
[4]
纺织 等领域。泡沫通常在使用过程中需要加入稳 非离子型稳泡剂一般为烷基胺类、脂肪醇酰胺
泡剂提高其稳定性以满足应用需求,常用稳泡剂包 类、烷基葡萄糖酸酐类和聚氧乙烯醚类等,前两类
括表面活性剂、聚合物和固体颗粒 [5-6] 。其中,固体 非离子型稳泡剂相对分子质量较小同时表面活性较
颗粒作为稳泡剂效果有限,聚合物类稳泡剂结构比 低,稳泡效果不明显。相对于聚氧乙烯醚类稳泡剂,
较复杂合成难以控制且应用范围小。表面活性剂类 烷基葡萄糖酸酐类分子中存在较多支链,因其较大
[7]
稳泡剂一般仅限于一些阴离子表面活性剂 ,而一 的空间位阻不利于分子在气-液界面上紧密排列,限
些非离子表面活性剂不仅具有降低表面张力作用, 制了其与其他表面活性剂的复配作用,从而降低了
还具备高分子聚合物增加体系黏度达到稳泡效果的 稳泡效果。因此,直链型非离子表面活性剂分子所
收稿日期:2018-07-30; 定用日期:2018-11-23; DOI: 10.13550/j.jxhg.20180567
基金项目:中央高校基本科研业务费专项资金(JUSRP51724B)
作者简介:费 良(1996—),男,硕士生,E-mail:296648012@qq.com。联系人:王潮霞(1969—),女,教授,E-mail:wchaoxia@sohu.com。