Page 220 - 精细化工2019年第9期
P. 220

·1948·                            精细化工   FINE CHEMICALS                                  第 36 卷

                 从表 4 可以看出,随着 DVE 质量分数的增加,                         urethane systems[J]. Progress in Organic Coatings, 2002, 44(2): 161-183.
            涂膜附着力和铅笔硬度减弱,但干燥时间减少,耐                             [6]   Geurink P J A, Scherer T , Buter R , et al. A complete new design for
            酸性和耐碱性越来越强。这是由于大分子链上接入                                 waterborne  2-pack  PUR  coatings  with  robust  application
                                                                   properties[J]. Progress in Organic Coatings, 2006, 55(2): 119-127.
            有机氟硅分子,可赋予涂膜优异的抗腐蚀性,能对
                                                               [7]   Melchiors M, Sonntag M , Kobusch C, et al. Recent developments in
            涂层起到明显的保护作用,且有机氟硅成膜过程中
                                                                   aqueous  two-component  polyurethane  (2K-PUR)  coatings[J].
            向膜表面迁移降低了胶膜的表面张力,使干燥速率                                 Progress in Organic Coatings, 2000, 40(1): 99-109.
            加快。                                                [8]   Yang  G,  Song  J,  Hou  X.  Fabrication  of  highly  hydrophobic
                                                                   two-component  thermosetting  polyurethane  surfaces  with  silica
            3    结论                                                nanoparticles[J]. Applied Surface Science, 2018, 439: 772-779.
                                                               [9]   Levine F, Scala J L, Kosik W . Properties of clear polyurethane films
                 采用 Micheal 加成反应,合成功能性氟硅单体                         modified  with  a  fluoropolymer  emulsion[J].  Progress  in  Organic
            DVE;然后改性丙烯酸二级分散体,并与水性多异                                Coatings, 2010, 69(1): 63-72.
            氰酸酯固化剂配制成有机氟硅改性 2K-WPU 涂膜,                         [10]  Ge  Z,  Luo  Y.  Synthesis  and  characterization  of  siloxane-modified
                                                                   two-component  waterborne  polyurethane[J].  Progress  in  Organic
            经检测得出以下结论:
                                                                   Coatings, 2013, 76(11): 1522-1526.
                (1)红外和核磁分析表明已合成功能性氟硅单
                                                               [11]  Xu Haiyan (许海燕), Zhang Xingyuan (张兴元), Dai Jiabing (戴家
            体 DVE;红外和 XPS 分析表明,有机氟硅烷被接入                            兵), et al. Research of fluorine-modified two component waterborne
            双组分聚氨酯分子链中,氟和硅原子能够迁移并富                                 acrylic  polyurethane  coating  performance[J].  Polyurethane  Industry
            集于涂膜的表面。                                               (聚氨酯工业), 2012, 27(1): 27-30.
                (2)粒径、黏度、稳定性测试和 TEM 分析表                        [12]  Li  Q,  Guo  L,  Qiu  T,  et al.  Synthesis  of  waterborne  polyurethane
                                                                   containing alkoxysilane side groups and the properties of the hybrid
            明,随着 DVE 质量分数的增加,丙烯酸二级分散体
                                                                   coating films[J]. Applied Surface Science, 2016, 377: 66-74.
            的粒径增大,黏度降低,当 DVE 质量分数超过 6%
                                                               [13]  Zhang F, Yu C. Application of a silicone-modified acrylic emulsion
            后,储存稳定性减弱。涂膜的附着力和铅笔硬度随                                 in  two-component  waterborne  polyurethane  coatings[J].  Journal  of
            着 DVE 质量分数的增加而减弱。                                      Coatings Technology & Research, 2007, 4(3): 289-294.
                (3)当有机氟硅烷质量分数为 6%时,涂膜的                         [14]  Standardization Administration of the People's Republic of China (中
            综合性能最佳,吸水率为 8.2%,水接触角为 91.5°,                          国国家标准化管理委员会). GB/T1722—1992: Methods of test for
                                                                   appearance  and  penetrability  of  varnishes,  boiled  oils  and  thinners
            T 10% 和 T 50% 分别为 220.9 和 438.5 ℃,表面粗糙,干
                                                                   (清漆,  清油及稀释剂颜色测定法)[S]. Beijing: Standards Press  of
            燥时间快;涂膜的耐热性、耐水性和耐酸碱性均有
                                                                   China, 1993: 1-5.
            显著提高。                                              [15]  Standardization Administration of the People's Republic of China (中
                                                                   国国家标准化管理委员会).  GB/T9286—1998:  Paints  and  varnishes-
            参考文献:
                                                                   Cross  cut  test for films (色漆和清漆  漆膜的划格试验)[S].  Beijing:
            [1]   Guo X, Ge S, Wang J, et al. Waterborne acrylic resin modified with   Standards Press of China, 1999: 547-555.
                 glycidyl  methacrylate  (GMA):  Formula  optimization  and  property   [16]  Standardization Administration of the People's Republic of China(中
                 analysis[J]. Polymer, 2018, 143:155-163.          国国家标准化管理委员会). GB/T1728—1979(1989): Methods of test
            [2]   Huang  S,  Xiao  J,  Zhu  Y,  et al.  Synthesis  and  properties  of   for drying time of coatings of paints and putties (漆膜,  腻子膜干燥
                 spray-applied  high  solid  content  two  component  polyurethane   时间测定法)[S]. Beijing: Standards Press of China, 1980: 402-403.
                 coatings based on polycaprolactone polyols[J]. Progress in Organic   [17]  Standardization Administration of the People's Republic of China(中
                 Coatings, 2017, 106: 60-68.                       国国家标准化管理委员会).  GB/T6739—2006:  Paints  and  varnishes-
            [3]   Wang L, Xu F, Li H, et al. Preparation and stability of aqueous acrylic   determination of film hardness by pencil test (色漆和清漆  铅笔法
                 polyol  dispersions  for  two-component  waterborne  polyurethane[J].   测定漆膜硬度)[S]. Beijing: Standards Press of China, 2007: 1-5.
                 Journal of Coatings Technology & Research, 2016, 14(1): 1-9.   [18]  Liu Fangyuan (刘方圆). Study on the preparation of waterborne anti-
            [4]   Akbarian M,  Olya M E,  Ataeefard  M,  et al.  The  influence  of   corrosion coatings[D]. Nanjing : Nanjing University of Science and
                 nanosilver on thermal and antibacterial properties of a 2K waterborne   Technology (南京工业大学), 2014.
                 polyurethane coating[J]. Progress in Organic Coatings, 2012, 75(4):   [19]  Zhang C, Zhu Z, Gong S,  et al.  Synthesis of  stable  high  hydroxyl
                 344-348.                                          content  self-emulsifying  waterborne  polyacrylate  emulsion[J].
            [5]   Jr  Z  W  W,  Wicks  D  A,  Rosthauser  J  W.  Two  package  waterborne    Journal of Applied Polymer Science, 2017, 134(21): 1-11.
   215   216   217   218   219   220   221   222   223   224   225