Page 75 - 《精细化工》2020年第8期

第 8 期 高于洋，等: 有机硅接枝三聚氰胺树脂的合成及其表面性能 ·1573·

著提高材料的热稳定性。 high-performance hydrophobic materials[J]. Journal of Applied Polymer
Science, 2019, 137: 48664-48673.
[13] NISHINO G, KANDA S, SUGIMOTO H, et al. Preparation and
3 结论 coating properties of an acrylic melamine resin containing silicone
segments[J]. Polymer Bulletin, 2012, 68(7): 2049-2060.
[14] Standardization Administration of the People's Republic of China.
以 DMAc 为溶剂、甲醇钠和 DBTDL 为 pH 调 Wood adhesives: Urea-formaldehyde, phenol-formaldehyde and
节剂，反应温度 95 ℃的工艺条件下，三聚氰胺、 melamine-formaldehyde resin: GB/T 14732 — 2017[S]. Beijing:
China Standard Press (中国标准出版社), 2017: 1-12.
多聚甲醛、PDMS-OH 可一步合成 MF-PDMS。低表 [15] Standardization Administration of the People's Republic of China.
面自由能的聚硅氧烷接枝共聚在 MF-PDMS 的分子 Measurement of water-contact angle of plastic films: GB/T 30693—
2014[S]. Beijing: China Standard Press (中国标准出版社), 2015:
结构中，增加了分子链长，降低了交联速度，提高 1-16.
[16] OWENS D K, WENDT R C. Estimation of the surface free energy of
了树脂的稳定性。树脂在固化过程中 Si 向材料表面 polymers[J]. Journal of Applied Polymer Science, 1969, 13(8): 1741-
富集，少量的 PDMS-OH 即可有效地提高材料的疏 1747.
[17] Standardization Administration of the People's Republic of China.
水性能和热学性能，解决了 PDMS-OH 与 MF 难以 Plastics-determination of water absorption: GB/T 1034—2008[S].
Beijing: China Standard Press (中国标准出版社), 2008: 1-15.
直接接枝聚合、物理混合性能不稳定及改性剂用量
[18] SONG G S, LIN Y N, ZHU Z C, et al. Strong fluorescence of
大的问题。PDMS-OH 用量仅为 1%的 MF-PDMS-01 poly(N-vinylpyrrolidone) and its oxidized hydrolyzate[J].
Macromolecular Rapid Communications, 2015, 36(3): 278-285.
膜与 MF 膜相比，水接触角从 68.78°提高至 91.81°， [19] XU W, ZHAO W J, HAO L F, et al. Synthesis and characterization of
表面自由能从 40.5 mN/m 降至 28.1 mN/m，25 ℃水 novel fluoroalkyl-terminated hyperbranched polyurethane latex[J].
Applied Surface Science, 2018, 436: 1104-1112.
中的吸水质量分数从 6.71%降至 2.83%，400 和 700 [20] HENRIQUES A, PAIVA N, BASTOS M, et al. Improvement of
storage stability and physicochemical properties by addition of
℃时的质量残余率分别由 32.08%提高至 50.44%、 benzoguanamine in melamine-formaldehyde resin synthesis[J].
由 10.04%提高至 16.60%。本研究结果为 MF 在疏水 Journal of Applied Polymer Science, 2017, 134(32): 45185-45195.
[21] SATDIVE A, MESTRY S, PATIL D, et al. Synthesis of melamine
涂料、三聚氰胺泡沫等领域的应用提供了理论依据。 formaldehyde cured castor oil based hydroxyl functional alkyd for coating
application[J]. Progress in Organic Coating, 2019, 131: 165-175.
参考文献： [22] URDL K, WEISS S, KARPA A, et al. Furan-functionalised melamine-
formaldehyde particles performing Diels-Alder reactions[J]. European
[1] ZOU J Y (邹怡佳), CHEN Y H (陈玉和), WU Z X (吴再兴). Research Polymer Journal, 2018, 108: 225-234.
progress on modified melamine resin[J]. Chemistry and Industry of [23] ZHOU Y S (周迎松), YU J R (于俊荣), SHEN Y (沈燕), et al.
Forest Products (林产化学与工业), 2013, 33(5): 127-130. Structuresand properties of benzoguanamine modified melamine
[2] FINK J K. Reactive polymers fundamentals and applications[M]. 3rd formaldehyde/polyvinyl alcohol fibers[J]. Polymer Materials Science
ed. William Andrew Publishing: Oxford, 2018: 275-285. and Engineering (高分子材料科学与工程), 2017, 33(2): 50-55.
[3] LIU Z (刘泽), ZHAO K (赵科), SUN P Q (孙培勤). High- [24] LIU X J, LI H Q, LIN X Y, et al. Synthesis of siloxane-modified
etherification melamine formaldehyde resin by dry method[J]. Fine melamine-formaldehyde microsphere and its heavy metal ions
Chemicals (精细化工), 2015, 32(1): 78-81. adsorption by coordination effects[J]. Colloids and Surfaces A:
[4] WANG Q, HE L, PAN A Z, et al. Removable/fluorescent adhesive Physicochemical and Engineering Aspects, 2015, 482: 491-499.
made by melamine-formaldehyde cross-linked polyvinyl alcohol and [25] ZHOU Y S, YU J R, WANG X X, et al. Preparation of KH570-SiO 2
its repair application in artifacts[J]. Applied Surface Science, 2019, and their modification on the MF/PVA composite membrane[J].
495: 143570-143581. Fibers and Polymers, 2015, 16(8): 1772-1780.
[5] MAGINA S, FERRA J, CRUZ P, et al. Fluorinated polyhedral [26] MATHEW A, KURMVANSHI S, MOHANTY S, et al. Sustainable
oligomeric silsesquioxane nanoparticles to boost the dirt repellence production of polyurethane from castor oil, functionalized with
of high pressure laminates[J]. Chemical Engineering Journal, 2016, epoxy- and hydroxyl-terminated poly(dimethyl siloxane) for biomedical
301: 362-370. applications[J]. Journal of Material Science, 2018, 53(5): 3119-3130.
[6] CHAI Y Q, ZHAO T B, GAO X, et al. Low cracking ratio of paraffin [27] SOBHANI S, JANNESARI A, BASTANI S. Effect of molecular
microcapsules shelled by hydroxyl terminated polydimethylsiloxane weight and content of PDMS on morphology and properties of
modified melamine-formaldehyde resin[J]. Colloids and Surfaces A: silicone-modified epoxy resin[J]. Journal of Applied Polymer
Physicochemical and Engineering Aspects, 2018, 538: 86-93. Science, 2012, 123(1): 162-178.
[7] NEMANIČ V, ZAJEC B, ŽUMER M, et al. Synthesis and [28] CHEN X M, WEIBEL J A, GARIMELLA S V. Continuous oil-water
characterization of melamine-formaldehyde rigid foams for vacuum separation using polydimethylsiloxane-functionalized melamine
thermal insulation[J]. Applied Energy, 2014, 114: 320-326. sponge[J]. Industrial & Engineering Chemistry Research, 2016,
[8] TENGSUTHIWAT J, ASAWAPIROM U, SIENENGCHIN S, et al. 55(12): 3596-3602.
Mechanical, thermal, and water absorption properties of melamine- [29] SHEN L X, HU H F, WANG S, et al. Preparation of super hydrophobic
formaldehyde-treated sisal fiber containing poly(lactic acid) mMoS 2/PDMS coating for fabrics[J]. Reactiveand Functional
composites[J]. Journal of Applied Polymer Science, 2018, 135(2): Polymers, 2019, 143: 104315-104325.
45681-45689. [30] COULLEREZ G, LÉONARD D, LUNDMARK S, et al. XPS and
[9] WU Z F, WANG H, TIAN X Y, et al. The effects of ToF-SIMS study of freeze-dried and thermally cured melamine-
polydimethylsiloxane on transparent and hydrophobic waterborne formaldehyde resins of different molar ratios[J]. Surface and
polyurethane coatings containing polydimethylsiloxane[J]. Physical Interface Analysis, 2000, 29(7): 431-443.
Chemistry Chemical Physics, 2014, 16(14): 6787-6794. [31] CAPPELLETTI G, ARDIZZONE S, MERONI D, et al. Wettability
[10] YARI H, MOHSENI M, MESSORI M. Toughened acrylic/melamine of bare and fluorinated silanes: A combined approach based on surface
thermosetting clear coats using POSS molecules: Mechanical and free energy evaluations and dipole moment calculations[J]. Journal of
morphological studies[J]. Polymer, 2015, 63: 19-29. Colloid and Interface Science, 2013, 389(1): 284-291.
[11] BADILA M, KOHLMAYR M, ZIKULNIG-RUSCH E M, et al. [32] MERLINE D J, VUKUSIC S, ABDALA A A. Melamine formaldehyde:
Improving the cleanability of melamine-formaldehyde-based decorative Curing studies and reaction mechanism[J]. Polymer Journal, 2013,
laminates[J]. Journal of Applied Polymer Science, 2014, 131(21): 45(4): 413-419.
40964-40972. [33] XIONG C L, LI X L, HOU T, et al. Stability and spinnability of modified
[12] GAO Y Y, LIU S Y, WANG Q Y, et al. Preparation of melamine- melamine-formaldehyde resin solution for centrifugal spinning[J].
formaldehyde resin grafted by (3-aminopropyl) triethoxysilane for Journal of Applied Polymer Science, 2018, 135(14): 46072-46083.