Page 84 - 《精细化工》2021年第6期
P. 84
·1146· 精细化工 FINE CHEMICALS 第 38 卷
参考文献:
[1] WANG L Y (王立言), LI J (李基), WANG M (王缦). Preliminary
study on the performance improvement of enzymatic plate by low
temperature plasma[C]//Compilation of Papers of the 5th National
Symposium on Immunodiagnostic and Vaccine (第五次全国免疫诊
断暨疫苗学术研讨会论文汇编), 2011: 555-556.
[2] JIAO K (焦奎), ZHANG S S (张书圣). Enzyme-linked immunoassay
and its application[M]. Beijing: Chemical Industry Press (化学工业
出版社), 2004: 188-196.
[3] ZHANG Y D, CAI Y A, LI L, et al. High-throughput biosensing of
neurotoxic insecticides using polystyrene microplate-immobilized
acetylcholinesterase[J]. Analytical Methods, 2012, 4(11): 3830-3835.
[4] KHALID Z, SAMEENA M, ROVIDHA S, et al. Advanced methods
in molecular biology and biotechnology[M]. Pittsburgh: Academic
图 8 SMCC 质量浓度对 PS-g-SMCC 蛋白吸附量的影响 Press, 2021: 1-2.
Fig. 8 Effects of SMCC mass concentration on the adsorption [5] ZHENG L X (郑力行), WANG H S (王华山). Polystyrene porous
capacity of PS-g-SMCC protein plate surface grafted with maleic anhydride[J]. Plastics (塑料), 2012,
41(4): 76-78.
[6] VESEL A, PRIMC G. Investigation of surface modification of
由图 8 可以看到,未处理的 PS 微孔板的蛋白吸 polystyrene by a direct and remote atmospheric-pressure plasma jet
2
附量为 230 ng/cm ;当等离子体处理后的 PS 微孔板 treatment[J]. Materials, 2020, 13(11): 2435.
[7] PUTIR S, DIONYSIUS J, MASRUROH M, et al. Stability of
再接枝 SMCC 后,蛋白吸附量显著增加,且随着 polystyrene film surface wettability modified using oxygen plasma[J].
SMCC 质量浓度的增加,PS-g-SMCC 的蛋白吸附量 Materials Today: Proceedings, 2019, 13(1): 24-29.
[8] LIU Y F (刘玉芳), WANG H S (王华山). Grafting polyacrylamide
逐渐增大;当 SMCC 质量浓度超过 5 g/L 后,蛋白 on the surface of γ-ray irradiated polystyrene microporous plates[J].
吸附量不再明显增大,表明蛋白吸附在此条件下达 Plastics (塑料), 2016, 45(1): 42-44.
[9] IWASA Y, YAMANOI K, IWANO K, et al. Tritium-doping
到饱和。接枝 SMCC 后的 PS 微孔板蛋白吸附量最 enhancement of polystyrene by ultraviolet laser and hydrogen plasma
2
大可达 903.08 ng/cm ,明显高于未经接枝 PS 微孔 irradiation for laser fusion experiments[J]. Fusion Engineering &
Design, 2016, 112: 269-273.
板的蛋白吸附量,可能原因是未处理 PS 板只依靠物 [10] ZAPLOTNIK R, VESEL A. Effect of VUV radiation on surface
理吸附蛋白,接枝 SMCC 后 PS 板不仅引入了可以 modification of polystyrene exposed to atmospheric pressure plasma
jet[J]. Polymers, 2020, 12(5): 1-12.
化学结合蛋白的表面层,还存在类似接枝前的物理再 [11] MONIKA B, KATERINA K, JINDRICH M, et al. Nanocomposite of
polystyrene foil grafted with metallaboranes for antimicrobial
吸附。蛋白吸附量越高,ELISA 检测时与抗体(抗原)
activity[J]. Applied Surface Science, 2018, 441: 120-129.
结合的量越多,响应度越高,可以有效提高检测的 [12] LI C M (李成明). Introduction to the topic "plasma surface treatment
technology" [J]. Surface Technology (表面技术), 2018, 47(4): 5-6.
灵敏性。
[13] MENG J Y (孟江燕), LI W D (李伟东), WANG Y Y (王云英).
Research progress of low-temperature plasma surface modified polymer
3 结论 materials[J]. Surface Technology (表面技术), 2009, 38(5): 86-89.
[14] JELIL R. A review of low-temperature plasma treatment of textile
materials[J]. Journal of Materials Science, 2015, 50: 5913-5943.
通过等离子体处理 PS 微孔板后,再接枝 SMCC [15] MA G Q, LIU X N, HUANG D H, et al. Surface modification of
偶联剂,制备了易于固定蛋白且通过化学吸附结合 polypropylene and compatibilization of interfaces in incompatible
blends of polypropylene with polystyrene by plasma of CO 2[J].
蛋白的 PS-g-SMCC 微孔板。通过 FTIR、SEM、EDS Applied Surface Science, 2009, 255(17): 7483-7494.
以及 XPS 表征分析,确证 PS 微孔板表面成功接枝 [16] ZHAO W X (赵文霞), WANG R (王蕊), ZHANG S (张硕), et al.
Preparation of N-TiO 2 by low temperature plasma assisted with
了丙烯酰胺与 SMCC。最佳等离子体处理条件为 nitrogen and its photocatalytic activity[J]. Fine Chemical (精细化
500 W、300 s,在此条件下制得的 PS-g-NH 2 微孔 工), 2020, 37(4): 752-757,764.
[17] ZHENG L X (郑力行). Study on surface modification of polystyrene
板表面达到超亲水状态,其表面引入氨基,N 原子 microporous plates by low-temperature plasma[D]. Tianjin: Tianjin
University of Science and Technology (天津科技大学), 2012.
个数百分比从 0(未改性 PS 微孔板)增加到 3.39%。
[18] FENG B(冯波), ZENG M X(曾美霞). Study on the microporous
60
等离子体处理对 PS 微孔板的 OD 值几乎没有影响, polystyrene plates irradiated by Co by ELISA[J]. Natural Science
Journal of Xiangtan University (湘潭大学自然科学学报), 2005,
可以进行 ELISA 测试。SMCC 的接枝显著提高了
27(2): 120-122.
PS 微孔板的蛋白吸附量,可以有效提高 PS 微孔板 [19] QIN J Q (秦金桥). Surface modification and properties of fibroin
artificial blood vessel materials[D]. Shanghai: Donghua University
在 ELISA 检测中的灵敏性。当 SMCC 质量浓度为 5 (东华大学), 2017.
g/L 时,制得的 PS-g-SMCC 微孔板对 BSA 的吸附 [20] FENG Y (冯燕). Optimization and application of SMCC antibody
directed coupling technique[D]. Shanghai: Huazhong University of
2
量最大,为 903.08 ng/cm ,蛋白吸附量比未处理的 Science and Technology (华中科技大学), 2011.
PS 微孔板提高了 2.93 倍。后续将探讨 PS-g-SMCC [21] HAN S X, WANG H S, SUN Z P, et al. Surface modification of PS
60
microtiter plate with chitosan oligosaccharides by Co irradiation[J].
微孔板稳定性的影响因素,设计接枝其他可增强 Carbohydrate Polymers, 2017, 176: 135-139.
ELISA 检测灵敏性的试剂,并研究其结构及蛋白吸 [22] XU B (徐斌). Graft copolymerization and alloying of polypropylene/
macromolecular monomer at low temperature induced by plasma[D].
附性能。 Tianjin: Tianjin University (天津大学), 2018.